The Edge Rackable Cambered Bar
The Rackable Cambered Curl Bar delivers deeper pressing and curl range with joint-friendly angles. And unlike most specialty bars, it actually racks properly.
Train harder without paying for it in your wrists.
Straight bars create wrist strain. Non-rackable EZ bars force awkward setups. This cambered design gives you ergonomic angles and safe rack compatibility in one bar.
Checkout the HyperTroFit Review here
Key Features:
• 4-Inch Camber – Increases range of motion for deeper bench presses and greater chest activation.
• Rackable Design – Fully rackable on 49” racks for easier plate loading and safer setup.
• 30° Angled Grips – Shoulder-width ergonomic grips reduce wrist and shoulder strain.
• Shorter, Stronger Build – At 71” and 31 lbs, this bar is 15” shorter than standard bars but still offers a 700 lb capacity and a 28mm diameter.
• Ample Sleeve Space – 10.5” chrome/titanium-coated sleeves provide plenty of room for heavy loads.
• Versatile Center Grip – 16” flat section allows for skull crushers, close-grip presses, curls, and more.
- 12 inches of grip from end of camber to the start of the sleeve.
- 28 inches from end of camber to other end of camber
• Precision Knurling – Medium-depth knurl provides the perfect grip—secure without tearing your hands.
• Built for Variety – Easily transition between pressing, squatting, rowing, and accessory lifts.
Top Exercises with a Cambered Bar:
• Lower Body: Cambered Bar Squats, Good Mornings, Split Squats, Zercher Squats
• Upper Body: Cambered Bench Press, Overhead Press, Barbell Curls and Bent-Over Rows
• Accessory: Skull crushers, Multi-Grip Curls
Shipping rates will be determined at checkout.
In-stock products will ship out 3 - 5 business days after purchase. Any Pre-order products will ship out once landed in our facility. Pre-order timelines will be clearly outlined in descriptions.
Edge Rackable Cambered Bar FAQ
What makes the Edge Rackable Cambered Bar different from a standard barbell?
The Edge Rackable Cambered Bar combines the rackability of a traditional barbell with a 4-inch camber and ergonomic 30-degree angled grips. This gives you a greater range of motion for pressing and curling while placing your wrists and shoulders in a more natural position.
It is also only 71 inches long—15 inches shorter than a standard Olympic barbell—without sacrificing serious training capacity.
Is the Edge Cambered Bar rackable?
Yes. The Edge Cambered Bar is specifically designed to rack properly on 49-inch-wide power racks. Unlike most traditional EZ curl bars and shorter specialty bars, it can be loaded directly from your J-cups for easier setup and safer training.
How deep is the camber?
The bar has a 4-inch camber. During bench presses, this allows the bar to travel below the normal stopping point created by a straight bar, increasing the available range of motion and creating a deeper stretch through the chest.
The camber can also increase range of motion during curls, rows, and other accessory movements.
Is the Edge Cambered Bar easier on the wrists and shoulders?
The 30-degree angled grips are designed to place your hands, wrists, elbows, and shoulders in a more natural position than a straight barbell. This can make pressing, curling, rowing, and accessory movements more comfortable—especially for lifters who find straight-bar positioning restrictive.
Individual mobility and comfort will vary, so always use a grip and range of motion appropriate for your body.
Is this an EZ curl bar or a cambered barbell?
It delivers advantages from both.
The angled grips provide the wrist-friendly positioning associated with an EZ curl bar, while the longer, rackable design allows it to function more like a specialty barbell. You can use it for curls and skull crushers, but you are not limited to arm training.
This is a full-body training bar built for presses, squats, rows, good mornings, split squats, Zercher squats, and more.
What exercises can I perform with the Edge Cambered Bar?
The Edge Cambered Bar can be used across upper-body, lower-body, and accessory training, including:
- Cambered bench presses
- Close-grip bench presses
- Overhead presses
- Barbell curls
- Skull crushers
- Bent-over rows
- Cambered bar squats
- Zercher squats
- Good mornings
- Split squats
Its angled grips, flat center section, and rackable construction make it far more versatile than a traditional curl bar.
Can the bar be used for squats?
Yes. The 28-inch cambered section creates multiple hand-positioning options, while the bar’s 700-pound capacity supports serious lower-body training.
The cambered shape also changes how the load moves during the lift, requiring greater control and stabilization than a standard straight bar. Begin with a manageable weight while learning how the bar responds.
How much does the Edge Rackable Cambered Bar weigh?
The bar weighs 31 pounds. Its shorter 71-inch overall length makes it easier to handle and maneuver than a standard 86-inch Olympic barbell while still providing a substantial, stable feel under load.
What is the bar’s weight capacity?
The Edge Rackable Cambered Bar has a 700-pound capacity, giving it the strength needed for heavy pressing, rowing, squatting, and accessory work.
What diameter is the shaft?
The bar uses a 28 mm shaft diameter. This provides a familiar barbell-style feel for pressing, curling, rowing, and lower-body movements.
What type of knurling does the bar have?
The Edge Cambered Bar uses medium-depth knurling designed to provide a secure grip without unnecessarily tearing up your hands. It delivers enough bite for demanding presses, curls, rows, and accessory work while remaining comfortable across higher-repetition training.
How much room is available on the sleeves?
Each sleeve provides 10.5 inches of loadable space, giving you ample room for demanding home-gym and commercial-style training. The sleeves feature a chrome/titanium coating for a clean, durable finish.
The number of plates you can load will depend on the thickness of your plates and collars.
What is the purpose of the flat center section?
The bar includes a 16-inch flat center section that expands your grip and exercise options. It can be used for close-grip presses, skull crushers, curls, Zercher movements, and other exercises where a straight center grip is preferred.
Will the Edge Cambered Bar fit every power rack?
The bar is designed to rack on power racks with an approximately 49-inch exterior width (standard rack width) but will also rack on shorter widths, without compromise.
The bar measures 28 inches from one end of the camber to the other, with 12 inches between each end of the camber and the beginning of the sleeve.
Is the Edge Cambered Bar good for a home gym?
Yes. At 71 inches long, the Edge Cambered Bar is 15 inches shorter than a standard Olympic barbell, making it easier to maneuver in home and garage gyms. Yet it still gives you a rackable design, 700-pound capacity, meaningful sleeve space, and enough versatility to train nearly your entire body.
It does not earn its place by being smaller. It earns it by doing more.
Is the Edge Cambered Bar only for advanced lifters?
No. The bar can be used by both developing and experienced lifters. Its angled grips may make many common exercises more comfortable, while its rackable design simplifies loading and setup.
If you are not satisfied with your product for any reason, return it within 14 days of purchase. Please see Refund Policy for more details.
You may also like
